Raymon Tarok – side view, compatible model for the frame protection kit

RAYMON TAROK Frame Protection Kit

Generation
Frame Size
Select finish
Cijena
Regular price 105 €
Regular price Sale price 105 €
Save -105 €
/
PDV uključen. Dostava se izračunava pri naplati.
  • Na zalihi, spremno za slanje
  • Backordered, shipping soon

Odlično se slaže

TECTORA BikeProtection E-MTB Frame Protection Film – STEK PPF Paint Protection for RAYMON TAROK

Want to keep your e-MTB in top shape? Our custom-fit STEK PPF paint protection film shields your RAYMON TAROK against rock chips, scratches, and cable rub — so your carbon frame stays looking new even after hundreds of hard trails.

Fitment & Compatibility

This kit was precision digital-designed and tested for:

  • Model: RAYMON TAROK frames (from 2026)
  • Material: Carbon frame
  • Sizes: Available for M and L

Coverage & Protection Zones (20-piece kit)

Precision full-frame protection, custom-designed for your RAYMON TAROK. The kit covers all critical areas:

  • Impact zones: Down tube & bottom bracket area (rock chip protection).
  • Frame structure: Top tube, head tube & seat tube.
  • Rear triangle: Chain stays & seat stays (heel strike protection).
  • Rider contact zones: Protection against paint abrasion from knees and clothing during aggressive riding.

Pro Installation Tips

  • Preparation: Remove the bottle cage and wheels for better access.
  • Positioning: Always work wet-on-wet. Leave approx. 3 mm gaps between pieces.
  • Bonding: Use a hair dryer on edges and curves to activate the adhesive.
  • Important: Do not wash the bike for at least 7 days after installation — the adhesive needs time to fully cure.

E-MTB Install Tip: How to nail the contact zones

On contact zones, take extra care — spend time on alignment and edges for a truly clean, professional finish.

What's Included – 20-piece Full-Frame Set

We make professional installation possible at home. Your kit contains:

  1. Pre-cut protection film: 100% precision fit — no cutting on the paint required.
  2. Application fluid: Spray bottle incl. Slip Solution (just add water).
  3. Pro squeegee: For a bubble-free finish.
  4. Microfiber cloth: For pre-cleaning and final finish.
  5. Step-by-step instructions: Easy to follow — perfect even for beginners.

Technical Specifications

Film Material

We exclusively use STEK PPF — a premium paint protection film made from thermoplastic polyurethane (TPU) — for maximum durability and reliable protection in demanding e-MTB conditions.

Film Thickness

208 microns — thick enough for rock and trail contact, flexible enough for a clean, precise installation.

Self-Healing Properties

The elastic top layer regenerates itself: light scratches and swirl marks disappear with heat — sunlight, warm water, or a hair dryer is all it takes.

Nano-Ceramic Coating

The film comes factory nano-coated. Mud and water bead off thanks to the Lotus Effect — dramatically cutting down post-trail cleaning time.

Warranty

10-year manufacturer warranty against yellowing and cracking.

Accessories & Frame Protection for your RAYMON TAROK

Looking for the right accessories for your RAYMON TAROK? Before you invest in new pedals, grips, or mudguards — think about protecting your investment first. A precision-fit frame protection kit is the foundation of a long bike life. While mudguards only protect against mud, our STEK PPF paint protection film completely seals your expensive carbon frame.

Why this kit is essential:

  • Fills protection gaps: Covers areas where no other accessory can reach.
  • Transport safety: Prevents the typical car rack scratches during transport.
  • Hard e-MTB use: Blocks rock chips and abrasion from shoes and body armor.

Film Quality & Material – STEK PPF

Our e-MTB frame protection film for the RAYMON TAROK is a perfect fit for every frame size — delivering maximum protection on every ride, from flow trails to the hardest descents.

This bike frame PPF is engineered specifically for carbon e-MTB frames — not a generic wrap, but a model-specific solution.

We rely on proven premium STEK PPF (TPU) for outstanding durability and long-lasting performance in the most demanding e-MTB conditions.

If you're looking for the best frame protection for your RAYMON TAROK, this full-frame STEK PPF kit is the ultimate choice. Ride hard. Stay protected.

Pitanja i odgovori

What is better for the RAYMON TAROK – PPF film or classic rubber frame guards?

PPF technology wins hands down. While rubber guards only protect small spots and ruin the look, our STEK film wraps around the entire frame like an invisible skin. It protects not just the down tube, but also the rear triangle and critical cable zones – without lifting at the edges or collecting dirt.
Will the film hold up on the RAYMON TAROK during hard e-MTB impacts and crashes?

Absolutely. Our STEK PPF is 208 microns thick – engineered to absorb impact energy. The RAYMON TAROK is built for aggressive enduro riding, so this thickness is what stands between a pristine carbon frame and costly damage after a hard hit on the trail.
Will the film on the RAYMON TAROK be visible or affect the look of the bike?

Not at all – we offer two variants to match your frame perfectly. The gloss variant is crystal clear and maintains the original shine of your bike – the result is a Factory-Look that is barely noticeable to the naked eye. The matte variant preserves the matte finish of your frame without any change in texture or appearance. Both variants use precision laser-cut pieces that end exactly at the tube transitions – your bike looks original, but is fully protected.

Kako nanijeti RAYMON TAROK Frame Protection Kit

Upute za montažu

Bicikl temeljito operi i osuši, zatim skini nosač bidona i kotače za bolji pristup. Sva mjesta montaže odmasti izopropilnim alkoholom i radi u čistoj prostoriji na 18–25 °C. Svaki dio položi prije skidanja zaštitnog papira i poravnanje najprije isprobaj na suho kako bi provjerio pravi položaj. Počni s gornjom cijevi, nastavi oko upravljačke cijevi, a zatim montiraj donju cijev. Foliju nanosi dio po dio, zaglađuj prema rubovima, nemoj je previše rastezati i između pojedinih dijelova ostavi razmak od oko 3 mm. Za kompletnu montažu računaj 1,5–4 sata.