Trek Fuel LX MTB – side view, compatible model for the frame protection kit

TREK FUEL LX Frame Protection Kit

Generation
Frame Size
Select finish
Price
Regular price 105 €
Regular price Sale price 105 €
Save -105 €
/
Tax included. Shipping calculated at checkout.
  • In stock, ready to ship
  • Backordered, shipping soon

Se dobro poda k

TECTORA BikeProtection MTB Frame Protection Film – STEK PPF Paint Protection for TREK FUEL LX

Your TREK FUEL LX deserves real protection. Our custom-fit STEK PPF frame protection film keeps rock chips, scratches, and cable rub away from your frame — so your bike looks just as good after every descent as it did before the ride.

Fitment & Compatibility

This kit was precision digital-designed and tested for:

  • Model: TREK FUEL LX frame Gen 7 (from 2026)
  • Material: Aluminium frame
  • Sizes: Available for M and L

Coverage & Protection Zones

Complete frame protection, tailored to the specific weak points of a trail and enduro MTB. The kit protects:

  • Impact zones: Down tube & bottom bracket area — where rock chips hit most.
  • Frame structure: Top tube, head tube & seat tube.
  • Rear triangle: Chain stays & seat stays — protection against shoe contact and mud abrasion.
  • Cable rub protection: Precision-cut pieces covering critical areas exposed to brake and gear cable abrasion.

Pro Installation Tips

  • Preparation: Remove the bottle cage and wheels — for full access to every area.
  • Positioning: Always work wet. Leave approx. 3 mm gaps between pieces.
  • Bonding: Use a hair dryer on edges and curves to fully activate the adhesive.
  • Important: Do not wash the bike for at least 7 days after installation — the adhesive needs time to fully cure.

MTB Install Tip: Check the edges after your first rides

After the first trails, briefly inspect the edges on high-stress zones — and if needed, go over them once more with a hair dryer.

What's Included – Full-Frame Set

Everything you need for a clean home installation — no professional required:

  1. Pre-cut protection film: Precision-fit pieces — no cutting on the frame required.
  2. Application fluid: Spray bottle with Slip Solution — just add water.
  3. Pro squeegee: For a bubble-free, smooth surface.
  4. Microfiber cloth: For pre-installation cleaning and final finish.
  5. Step-by-step instructions: Clear and easy to follow — perfect for first-time installers.

Technical Specifications

Film Material

We exclusively use STEK PPF — a premium thermoplastic polyurethane (TPU) from American manufacturer STEK. Engineered for maximum performance on rough and technical trails.

Film Thickness

208 microns — robust enough for hard rock strikes, flexible enough for a precise fit on complex frame geometries.

Self-Healing Properties

The elastic top layer regenerates itself with heat. Swirl marks and light scratches disappear with sunlight, warm water, or a hair dryer — effortlessly.

Nano-Ceramic Coating

Factory-applied nano-coating with Lotus Effect: mud and water bead off reliably — dramatically reducing post-trail cleaning time.

Warranty

10-year manufacturer warranty against yellowing and cracking.

Accessories & Frame Protection for your TREK FUEL LX

A new bike needs the right base protection — before pedals, grips, or mudguards even come into play. A precision-fit frame protection film secures the value of your TREK FUEL LX exactly where no other accessory can reach.

What makes this kit essential:

  • Rock chip protection: Absorbs impacts on the down tube before they reach the paint.
  • Transport safety: No more scratches from car racks or bike boxes.
  • Trail abrasion: Protects chain stays and contact zones from shoe and mud abrasion.

Film Quality & Material – STEK PPF

Our MTB frame protection film for the TREK FUEL LX was developed specifically for this frame — every curve, every edge fits perfectly. From relaxed flow trails to demanding technical enduro descents.

This bike frame PPF is engineered specifically for trail and enduro MTB frames — not a generic wrap, but a model-specific protection solution.

We trust STEK PPF — one of the most reliable paint protection films from the USA — for long-lasting protection that holds up even after hundreds of hard trails.

The best frame protection for your TREK FUEL LX is one you never see — but always feel. Ride hard. Stay protected.

Vprašanja & Odgovori

Kaj je boljše za okvir TREK FUEL LX – PPF folija ali klasični gumijasti ščitniki okvirja?

Odvisno od območja – guma je standard pod verigo. Za preostanek okvirja PPF folija jasno zmaga. Medtem ko gumijasti ščitniki kvarijo estetiko in ščitijo le majhne površine, se naša STEK folija ovije okoli celotnega okvirja kot nevidna koža. Ščiti spodnjo cev, zadnji trikotnik in cone kablov – brez dviganja na robovih ali zbiranja umazanije.
Ali okvir TREK FUEL LX potrebuje zaščito če ga prevažam na poti v torbi za kolo ali kombiju?

Absolutno – transport je eden najpogostejših vzrokov poškodb okvirja na trail kolesih. Pasovi, stik z drugimi kolesi in stene kombija ali bike boxa puščajo sledi ki jih nobeno čiščenje ne odstrani. Naša STEK PPF ščiti celoten okvir od prvega prevoza – da tvoj TREK FUEL LX prispe na izhodišče poti v enakem stanju v katerem je zapustil garažo.
Kako se nanese PPF folija na okvir TREK FUEL LX – je to težko?

Sploh ne – komplet uporablja metodo mokre aplikacije. Poškropi okvir in folijo s Slip-Solution, namesti kos in iztisni tekočino z vključeno lopatico. Za robove in krivine uporabi sušilnik za lase na nizki temperaturi za aktivacijo lepila. Po nanosu pusti kolo vsaj 7 dni pred pranjem – lepilo potrebuje čas za popolno utrjevanje.

Kako nalepiti vaš TREK FUEL LX Frame Protection Kit

Navodila za namestitev


Kolo temeljito očisti in posuši, nato odstrani držalo za bidono in kolesa za boljši dostop. Razmasti vsa mesta namestitve z izopropilnim alkoholom in delaj v čistem prostoru pri temperaturi 18–25 °C. Preden odstraniš zaščitno folijo, razporedi vsak kos in opravi suho preizkušnjo, da preveriš pravilno poravnavo. Začni z zgornjo cevjo, nadaljuj okoli krmilne cevi in nato namesti spodnjo cev. Nanaša j po odsekih, gladi proti robovom, izogibaj se pretiranemu raztezanju in pusti razmak približno 3 mm med posameznimi kosi. Predvidi od 1,5 do 4 ure za celotno namestitev.