SPECIALIZED / S-WORKS TURBO LEVO Frame Protection Kit

TECTORA BikeProtection E-MTB Frame Protection Film – STEK PPF Paint Protection for SPECIALIZED / S-WORKS TURBO LEVO

Want to keep your e-MTB in top shape? Our custom-fit STEK PPF paint protection film shields your SPECIALIZED / S-WORKS TURBO LEVO against rock chips, scratches, and cable rub — so your carbon frame stays looking new even after hundreds of hard trails.

Fitment & Compatibility

This kit was precision digital-designed and tested for:

Model: SPECIALIZED / S-WORKS TURBO LEVO frames Gen 4 (from 2025) and Gen 3 (2021-2024)
Material: Carbon & Aluminium frames
Sizes: Available for S2, S3, S4 and S5

Coverage & Protection Zones (18-piece kit)

Precision full-frame protection, custom-designed for your SPECIALIZED / S-WORKS TURBO LEVO. The kit covers all critical areas:

Impact zones: Down tube & bottom bracket area (rock chip protection).
Frame structure: Top tube, head tube & seat tube.
Rear triangle: Chain stays & seat stays (heel strike protection).
Rider contact zones: Protection against paint abrasion from knees and clothing during aggressive riding.

Pro Installation Tips

Preparation: Remove the bottle cage and wheels for better access.
Positioning: Always work wet-on-wet. Leave approx. 3 mm gaps between pieces.
Bonding: Use a hair dryer on edges and curves to activate the adhesive.
Important: Do not wash the bike for at least 7 days after installation — the adhesive needs time to fully cure.

E-MTB Install Tip: How to nail the contact zones

On contact zones, take extra care — spend time on alignment and edges for a truly clean, professional finish.

What's Included – 18-piece Full-Frame Set

We make professional installation possible at home. Your kit contains:

Pre-cut protection film: 100% precision fit — no cutting on the paint required.
Application fluid: Spray bottle incl. Slip Solution (just add water).
Pro squeegee: For a bubble-free finish.
Microfiber cloth: For pre-cleaning and final finish.
Step-by-step instructions: Easy to follow — perfect even for beginners.

Technical Specifications

Film Material

We exclusively use STEK PPF — a premium paint protection film made from thermoplastic polyurethane (TPU) — for maximum durability and reliable protection in demanding e-MTB conditions.

Film Thickness

208 microns — thick enough for rock and trail contact, flexible enough for a clean, precise installation.

Self-Healing Properties

The elastic top layer regenerates itself: light scratches and swirl marks disappear with heat — sunlight, warm water, or a hair dryer is all it takes.

Nano-Ceramic Coating

The film comes factory nano-coated. Mud and water bead off thanks to the Lotus Effect — dramatically cutting down post-trail cleaning time.

Warranty

10-year manufacturer warranty against yellowing and cracking.

Accessories & Frame Protection for your SPECIALIZED / S-WORKS TURBO LEVO

Looking for the right accessories for your SPECIALIZED / S-WORKS TURBO LEVO? Before you invest in new pedals, grips, or mudguards — think about protecting your investment first. A precision-fit frame protection kit is the foundation of a long bike life. While mudguards only protect against mud, our STEK PPF paint protection film completely seals your expensive carbon frame.

Why this kit is essential:

Fills protection gaps: Covers areas where no other accessory can reach.
Transport safety: Prevents the typical car rack scratches during transport.
Hard e-MTB use: Blocks rock chips and abrasion from shoes and body armor.

Film Quality & Material – STEK PPF

Our e-MTB frame protection film for the SPECIALIZED / S-WORKS TURBO LEVO is a perfect fit for every frame size — delivering maximum protection on every ride, from flow trails to the hardest descents.

This bike frame PPF is engineered specifically for carbon e-MTB frames — not a generic wrap, but a model-specific solution.

We rely on proven premium STEK PPF (TPU) for outstanding durability and long-lasting performance in the most demanding e-MTB conditions.

If you're looking for the best frame protection for your SPECIALIZED / S-WORKS TURBO LEVO, this full-frame STEK PPF kit is the ultimate choice. Ride hard. Stay protected.

Vprašanja & Odgovori

Kaj je boljše za SPECIALIZED TURBO LEVO – PPF folija ali klasični gumijasti ščitniki okvirja?

Nedvomno PPF tehnologija. Medtem ko gumijasti ščitniki ščitijo le majhne površine in kvarijo estetiko, se naša STEK folija ovije okoli celotnega okvirja kot nevidna koža. Ščiti ne le spodnjo cev, temveč tudi zadnji trikotnik in kritične cone kablov – brez dviganja na robovih ali zbiranja umazanije.

Ali se splača zaščititi okvir SPECIALIZED TURBO LEVO – tudi če vozim previdno?

Absolutno – ker večina poškodb ne nastane med padci. Vsakodnevna tveganja kot so praske pri transportu, drobni kamni na poteh ali drgnjenje kablov se seštevajo in drastično znižujejo vrednost pri nadaljnji prodaji. Naša folija ohranja stanje kot novo trajno – ne glede na to, kako previdno vozite.

Ali bo odstranitev folije poškodovala okvir SPECIALIZED TURBO LEVO?

Ne – STEK PPF uporablja tlačno občutljivo lepilo, ki je popolnoma varno tako za ogljikove kot aluminijaste okvirje. Pri pravilnem odstranjevanju – počasi in z nežno toploto sušilnika – folija ne pušča ostankov in ne povzroča nobene škode na laku ali površini okvirja.

Kako nalepiti vaš SPECIALIZED / S-WORKS TURBO LEVO Frame Protection Kit

Navodila za namestitev

Kolo temeljito očisti in posuši, nato odstrani držalo za bidono in kolesa za boljši dostop. Razmasti vsa mesta namestitve z izopropilnim alkoholom in delaj v čistem prostoru pri temperaturi 18–25 °C. Preden odstraniš zaščitno folijo, razporedi vsak kos in opravi suho preizkušnjo, da preveriš pravilno poravnavo. Začni z zgornjo cevjo, nadaljuj okoli krmilne cevi in nato namesti spodnjo cev. Nanaša j po odsekih, gladi proti robovom, izogibaj se pretiranemu raztezanju in pusti razmak približno 3 mm med posameznimi kosi. Predvidi od 1,5 do 4 ure za celotno namestitev.