Cube Reaction c62 – side view, compatible model for the frame protection kit

CUBE REACTION C:62 Frame Protection Kit

Generation
Frame Size
Select finish
Price
Regular price 105 €
Regular price Sale price 105 €
Save -105 €
/
Tax included. Shipping calculated at checkout.
  • In stock, ready to ship
  • Backordered, shipping soon

Se dobro poda k

TECTORA BikeProtection MTB Frame Protection Film – STEK PPF Paint Protection for CUBE REACTION C:62

Your CUBE REACTION C:62 deserves real protection. Our custom-fit STEK PPF frame protection film keeps rock chips, scratches, and cable rub away from your frame — so your bike looks just as good after every descent as it did before the ride.

Fitment & Compatibility

This kit was precision digital-designed and tested for:

  • Model: CUBE REACTION C:62 frame (from 2025)
  • Material: Carbon frame
  • Sizes: Available for M, L and XL

Coverage & Protection Zones

Complete frame protection, tailored to the specific weak points of a trail and enduro MTB. The kit protects:

  • Impact zones: Down tube & bottom bracket area — where rock chips hit most.
  • Frame structure: Top tube, head tube & seat tube.
  • Rear triangle: Chain stays & seat stays — protection against shoe contact and mud abrasion.
  • Cable rub protection: Precision-cut pieces covering critical areas exposed to brake and gear cable abrasion.

Pro Installation Tips

  • Preparation: Remove the bottle cage and wheels — for full access to every area.
  • Positioning: Always work wet. Leave approx. 3 mm gaps between pieces.
  • Bonding: Use a hair dryer on edges and curves to fully activate the adhesive.
  • Important: Do not wash the bike for at least 7 days after installation — the adhesive needs time to fully cure.

MTB Install Tip: Check the edges after your first rides

After the first trails, briefly inspect the edges on high-stress zones — and if needed, go over them once more with a hair dryer.

What's Included – Full-Frame Set

Everything you need for a clean home installation — no professional required:

  1. Pre-cut protection film: Precision-fit pieces — no cutting on the frame required.
  2. Application fluid: Spray bottle with Slip Solution — just add water.
  3. Pro squeegee: For a bubble-free, smooth surface.
  4. Microfiber cloth: For pre-installation cleaning and final finish.
  5. Step-by-step instructions: Clear and easy to follow — perfect for first-time installers.

Technical Specifications

Film Material

We exclusively use STEK PPF — a premium thermoplastic polyurethane (TPU) from American manufacturer STEK. Engineered for maximum performance on rough and technical trails.

Film Thickness

208 microns — robust enough for hard rock strikes, flexible enough for a precise fit on complex frame geometries.

Self-Healing Properties

The elastic top layer regenerates itself with heat. Swirl marks and light scratches disappear with sunlight, warm water, or a hair dryer — effortlessly.

Nano-Ceramic Coating

Factory-applied nano-coating with Lotus Effect: mud and water bead off reliably — dramatically reducing post-trail cleaning time.

Warranty

10-year manufacturer warranty against yellowing and cracking.

Accessories & Frame Protection for your CUBE REACTION C:62

A new bike needs the right base protection — before pedals, grips, or mudguards even come into play. A precision-fit frame protection film secures the value of your CUBE REACTION C:62 exactly where no other accessory can reach.

What makes this kit essential:

  • Rock chip protection: Absorbs impacts on the down tube before they reach the paint.
  • Transport safety: No more scratches from car racks or bike boxes.
  • Trail abrasion: Protects chain stays and contact zones from shoe and mud abrasion.

Film Quality & Material – STEK PPF

Our MTB frame protection film for the CUBE REACTION C:62 was developed specifically for this frame — every curve, every edge fits perfectly. From relaxed flow trails to demanding technical enduro descents.

This bike frame PPF is engineered specifically for trail and enduro MTB frames — not a generic wrap, but a model-specific protection solution.

We trust STEK PPF — one of the most reliable paint protection films from the USA — for long-lasting protection that holds up even after hundreds of hard trails.

The best frame protection for your CUBE REACTION C:62 is one you never see — but always feel. Ride hard. Stay protected.

Vprašanja & Odgovori

Kaj je boljše za okvir CUBE REACTION C:62 – PPF folija ali klasični gumijasti ščitniki okvirja?

Odvisno od območja – guma je standard pod verigo. Za preostanek okvirja PPF folija jasno zmaga. Medtem ko gumijasti ščitniki kvarijo estetiko in ščitijo le majhne površine, se naša STEK folija ovije okoli celotnega okvirja kot nevidna koža. Ščiti spodnjo cev, zadnji trikotnik in cone kablov – brez dviganja na robovih ali zbiranja umazanije.
Kako dolgo zdrži PPF folija na okvirju CUBE REACTION C:62 – ali se splača dolgoročno?

Naša STEK PPF ima 10-letno garancijo proizvajalca proti rumenenju in pokanju. V resničnih trailskih razmerah folija ohranja polno oprijemljivost in zaščito leta – tudi na okvirjih, izpostavljenih blatu, kamnom in zahtevnemu vremenu pri vsaki vožnji. Če se odločiš prodati ali zamenjati okvir, folijo lahko čisto odstranimo brez kakršne koli poškodbe karbonove barve.
Ali lahko folijo PPF z okvirja CUBE REACTION C:62 odstranim brez poškodbe karbona?

Da – STEK PPF uporablja tlačno občutljivo lepilo, posebej zasnovano za ogljikove površine. Pri pravilnem odstranjevanju – počasi in z nežno toploto sušilnika za lase – folija ne pušča ostankov in ogljikova barva ostane popolnoma nepoškodovana. Ni tveganja za odlepitev ali dviganje barve, dokler poteka odstranjevanje potrpežljivo in pri pravi temperaturi.

Kako nalepiti vaš CUBE REACTION C:62 Frame Protection Kit

Navodila za namestitev


Kolo temeljito očisti in posuši, nato odstrani držalo za bidono in kolesa za boljši dostop. Razmasti vsa mesta namestitve z izopropilnim alkoholom in delaj v čistem prostoru pri temperaturi 18–25 °C. Preden odstraniš zaščitno folijo, razporedi vsak kos in opravi suho preizkušnjo, da preveriš pravilno poravnavo. Začni z zgornjo cevjo, nadaljuj okoli krmilne cevi in nato namesti spodnjo cev. Nanaša j po odsekih, gladi proti robovom, izogibaj se pretiranemu raztezanju in pusti razmak približno 3 mm med posameznimi kosi. Predvidi od 1,5 do 4 ure za celotno namestitev.