Orbea Oiz – side view, compatible model for the frame protection kit

ORBEA OIZ Frame Protection Kit

Generation
Frame Size
Select finish
Price
Regular price 105 €
Regular price Sale price 105 €
Save -105 €
/
Tax included. Shipping calculated at checkout.
  • In stock, ready to ship
  • Backordered, shipping soon

Pairs well with

TECTORA BikeProtection XC MTB Frame Protection Film – STEK PPF Paint Protection for ORBEA OIZ

Your ORBEA OIZ is built to go fast — our custom-fit STEK PPF frame protection film keeps rock chips, scratches, and cable rub off your carbon frame, so it stays race-ready through every training session and every season.

Fitment & Compatibility

This kit was precision digital-designed and tested for:

  • Model: ORBEA OIZ frame (from 2023)
  • Material: Carbon frame
  • Sizes: Available for L and XL

Coverage & Protection Zones (20-piece kit)

Complete frame protection, tailored to the specific high-wear zones of a modern XC race bike. The kit protects:

  • Impact zones: Down tube & bottom bracket area — where trail grit and rock chips hit most.
  • Frame structure: Top tube, head tube & seat tube.
  • Rear triangle: Chain stays & seat stays — protection against chain slap, trail grit, and mud spray.
  • Cable rub protection: Precision-cut pieces covering cable-entry points and high-contact areas exposed to constant friction.

Pro Installation Tips

  • Preparation: Remove the bottle cage and wheels — for full access to every area.
  • Positioning: Always work wet. Leave approx. 3 mm gaps between pieces.
  • Bonding: Use a hair dryer on edges and curves to fully activate the adhesive.
  • Important: Do not wash the bike for at least 7 days after installation — the adhesive needs time to fully cure.

XC Install Tip: Focus on cable-entry points and tight curves

On XC frames, take extra care around cable-entry points and tight curves — perfect alignment here keeps edges invisible and long-lasting.

What's Included – 20-piece Full-Frame Set

Everything you need for a clean home installation — no professional required:

  1. Pre-cut protection film: Precision-fit pieces — no cutting on the frame required.
  2. Application fluid: Spray bottle with Slip Solution — just add water.
  3. Pro squeegee: For a bubble-free, smooth surface.
  4. Microfiber cloth: For pre-installation cleaning and final finish.
  5. Step-by-step instructions: Clear and easy to follow — perfect for first-time installers.

Technical Specifications

Film Material

We exclusively use STEK PPF — a premium thermoplastic polyurethane (TPU) from American manufacturer STEK. Engineered for long-distance XC performance — lightweight, crystal-clear, and built to last through high-mileage racing seasons.

Film Thickness

208 microns — thin enough to stay invisible on a race bike, tough enough to handle trail grit, dust, and constant debris spray.

Self-Healing Properties

The elastic top layer regenerates itself with heat. Swirl marks and light scratches disappear with sunlight, warm water, or a hair dryer — effortlessly.

Nano-Ceramic Coating

Factory-applied nano-coating with Lotus Effect: mud, dust, and water bead off reliably — making post-ride maintenance faster so you stay focused on performance.

Warranty

10-year manufacturer warranty against yellowing and cracking.

Accessories & Frame Protection for your ORBEA OIZ

Before you invest in a new computer mount, pedals, or bottle cage — secure your frame first. A precision-fit frame protection film protects the value of your ORBEA OIZ exactly where no other accessory reaches — through every race, every training block, every season.

What makes this kit essential:

  • Rock chip protection: Absorbs impacts on the down tube before they damage the carbon.
  • Transport safety: No more scratches from car racks or race venue handling.
  • XC abrasion: Protects chain stays and cable zones from grit, dust, and chain slap over long-distance riding.

Film Quality & Material – STEK PPF

Our XC MTB frame protection film for the ORBEA OIZ was developed specifically for this frame — every curve, every cable entry, every tight radius fits perfectly. From fast training laps to full-season race mileage.

This bike frame PPF is engineered specifically for XC and race MTB frames — not a generic wrap, but a model-specific protection solution built for speed and precision.

We trust STEK PPF — one of the most reliable paint protection films from the USA — for long-lasting protection that keeps up with your race schedule.

If you're looking for the best XC bike protection for your ORBEA OIZ, this full-frame STEK PPF kit is the ultimate choice. Ride fast. Stay protected.

Questions & Answers

What is better for the ORBEA OIZ frame – PPF film or classic rubber frame guards?

On a race XC bike, rubber guards have no place – they add unnecessary weight and ruin the clean look of the frame. Our STEK PPF film weighs next to nothing, is practically invisible and wraps around the entire frame like an invisible skin – protecting the down tube, rear triangle and cable zones without lifting at the edges.
Does the ORBEA OIZ frame need protection if I transport it to races in a bike bag or team van?

Absolutely – transport is one of the most common causes of frame damage on XC race bikes. Straps, contact with other bikes and the walls of a van or bike box leave marks that no amount of cleaning will remove. Our STEK PPF protects the entire frame from the first transport – so your ORBEA OIZ arrives at the start line in the same condition it left the garage.
How do I apply PPF film to the ORBEA OIZ frame – is it difficult?

Not at all – the kit uses the wet application method. Spray the frame and film with Slip-Solution, position the piece and squeeze out the liquid with the included squeegee. For edges and curves, use a hair dryer on low heat to activate the adhesive. After application, leave the bike for at least 7 days before washing – the adhesive needs time to fully cure.

How to apply your ORBEA OIZ Frame Protection Kit

Instructions

Clean and dry the bike thoroughly, then remove the bottle cage and wheels for better access. Degrease all installation areas with isopropyl alcohol and work in a clean space at 18–25 °C. Lay out and dry-fit each piece to confirm alignment before peeling the backing. Start with the top tube, continue around the head tube, then install the down tube. Apply section by section, smooth toward the edges, avoid overstretching, and leave about a 3 mm gap between separate pieces. Allow 1.5–4 hours for a complete install.