CUBE AMS HYBRID ONE77 Frame Protection Kit
TECTORA frame protection fitment guide for Cube AMS Hybrid One77 (from 2026, carbon) - all 18 pre-cut STEK PPF pieces shown.
CUBE AMS HYBRID ONE77 Frame Protection Kit
TECTORA frame protection fitment guide for Cube AMS Hybrid One77 (from 2026, carbon) - all 18 pre-cut STEK PPF pieces shown.

CUBE AMS HYBRID ONE77 Frame Protection Kit

Generation
Frame Size
Select finish
Price
Regular price 105 €
Regular price Sale price 105 €
Save -105 €
/
Tax included. Shipping calculated at checkout.
  • In stock, ready to ship
  • Backordered, shipping soon

Pairs well with

TECTORA BikeProtection E-MTB Frame Protection Film – STEK PPF Paint Protection for CUBE AMS HYBRID ONE77

Want to keep your e-MTB in top shape? Our custom-fit STEK PPF paint protection film shields your CUBE AMS HYBRID ONE77 against rock chips, scratches, and cable rub — so your carbon frame stays looking new even after hundreds of hard trails.

Fitment & Compatibility

This kit was precision digital-designed and tested for:

  • Model: CUBE AMS HYBRID ONE77 frames (from 2026)
  • Material: Carbon frame
  • Sizes: Available for M, L and XL

Coverage & Protection Zones (18-piece kit)

Precision full-frame protection, custom-designed for your CUBE AMS HYBRID ONE77. The kit covers all critical areas:

  • Impact zones: Down tube & bottom bracket area (rock chip protection).
  • Frame structure: Top tube, head tube & seat tube.
  • Rear triangle: Chain stays & seat stays (heel strike protection).
  • Rider contact zones: Protection against paint abrasion from knees and clothing during aggressive riding.

Pro Installation Tips

  • Preparation: Remove the bottle cage and wheels for better access.
  • Positioning: Always work wet-on-wet. Leave approx. 3 mm gaps between pieces.
  • Bonding: Use a hair dryer on edges and curves to activate the adhesive.
  • Important: Do not wash the bike for at least 7 days after installation — the adhesive needs time to fully cure.

E-MTB Install Tip: How to nail the contact zones

On contact zones, take extra care — spend time on alignment and edges for a truly clean, professional finish.

What's Included – 18-piece Full-Frame Set

We make professional installation possible at home. Your kit contains:

  1. Pre-cut protection film: 100% precision fit — no cutting on the paint required.
  2. Application fluid: Spray bottle incl. Slip Solution (just add water).
  3. Pro squeegee: For a bubble-free finish.
  4. Microfiber cloth: For pre-cleaning and final finish.
  5. Step-by-step instructions: Easy to follow — perfect even for beginners.

Technical Specifications

Film Material

We exclusively use STEK PPF — a premium paint protection film made from thermoplastic polyurethane (TPU) — for maximum durability and reliable protection in demanding e-MTB conditions.

Film Thickness

208 microns — thick enough for rock and trail contact, flexible enough for a clean, precise installation.

Self-Healing Properties

The elastic top layer regenerates itself: light scratches and swirl marks disappear with heat — sunlight, warm water, or a hair dryer is all it takes.

Nano-Ceramic Coating

The film comes factory nano-coated. Mud and water bead off thanks to the Lotus Effect — dramatically cutting down post-trail cleaning time.

Warranty

10-year manufacturer warranty against yellowing and cracking.

Accessories & Frame Protection for your CUBE AMS HYBRID ONE77

Looking for the right accessories for your CUBE AMS HYBRID ONE77? Before you invest in new pedals, grips, or mudguards — think about protecting your investment first. A precision-fit frame protection kit is the foundation of a long bike life. While mudguards only protect against mud, our STEK PPF paint protection film completely seals your expensive carbon frame.

Why this kit is essential:

  • Fills protection gaps: Covers areas where no other accessory can reach.
  • Transport safety: Prevents the typical car rack scratches during transport.
  • Hard e-MTB use: Blocks rock chips and abrasion from shoes and body armor.

Film Quality & Material – STEK PPF

Our e-MTB frame protection film for the CUBE AMS HYBRID ONE77 is a perfect fit for every frame size — delivering maximum protection on every ride, from flow trails to the hardest descents.

This bike frame PPF is engineered specifically for carbon e-MTB frames — not a generic wrap, but a model-specific solution.

We rely on proven premium STEK PPF (TPU) for outstanding durability and long-lasting performance in the most demanding e-MTB conditions.

If you're looking for the best frame protection for your CUBE AMS HYBRID ONE77, this full-frame STEK PPF kit is the ultimate choice. Ride hard. Stay protected.

Questions & Answers

Is PPF film on the CUBE AMS HYBRID ONE77 really necessary? Or does an electric mountain bike frame not need any protection?

The frame needs protection every day — not just in crashes. Rock strikes, mud abrasion, chain slap and cable zones attack the frame on every ride. STEK PPF covers the entire frame like an invisible skin — without changing the look or affecting the electronics.
Does PPF film on the CUBE AMS HYBRID ONE77 protect the battery zone and motor cables — or just the painted frame?

The battery zone and motor cable transitions are the most vulnerable — and the most expensive to repair. STEK PPF covers the entire frame including the battery area, charging port and motor cable transitions. If the battery cover is painted, the protective film covers this part too — complete protection of every painted surface.
Is installing PPF film on the CUBE AMS HYBRID ONE77 difficult — especially around the integrated battery?

No — but the battery zone requires extra attention. The wet application technique lets you slide the film until it sits perfectly. Focus on the areas around the integrated battery and charging port, heat edges with a hair dryer only at the very end. Wait 7 days before the first wash.

How to apply your CUBE AMS HYBRID ONE77 Frame Protection Kit

Instructions

Clean and dry the bike thoroughly, then remove the bottle cage and wheels for better access. Degrease all installation areas with isopropyl alcohol and work in a clean space at 18–25 °C. Lay out and dry-fit each piece to confirm alignment before peeling the backing. Start with the top tube, continue around the head tube, then install the down tube. Apply section by section, smooth toward the edges, avoid overstretching, and leave about a 3 mm gap between separate pieces. Allow 1.5–4 hours for a complete install.