Amflow PR Carbon (2026) — PPF Frame Protection | Tectora Bike Protection
Applies to both versions: Amflow PR Carbon and PR Carbon Pro (2026- )
The Amflow PR Carbon is a new chapter in e-MTB from a brand backed by DJI — the technology giant that also owns Avinox, the manufacturer of the drive units. Where the PX Carbon bet everything on maximum performance and an integrated battery, the PR Carbon takes a different path: a larger removable 800 Wh battery, a more accessible price from €5,899, and the same powerful Avinox M2S motor with 150 N·m and 1,500 W of peak power. The frame weighs just 2.9 kg, the complete bike around 24 kg. That's why at BikeProtection we developed a Tectora PPF kit cut specifically for this frame.
How is the Amflow PR Carbon different from the PX Carbon?
The Amflow PX Carbon has a permanently integrated battery inside the down tube — giving it an incredibly slim profile and minimum weight. The PR Carbon takes the opposite approach: the 800 Wh battery is removable, it can be taken out and charged away from the bike, and supplemented with an external 600 Wh battery for long rides. The result is greater range — up to 158 km according to Amflow — but also a larger battery cover on the frame.
This plastic battery cover is not painted and is not part of the Tectora (STEK PPF) kit from BikeProtection. The rest of the carbon frame — including the down tube, top tube, chainstays, and rear triangle — is fully protected by our STEK PPF.
Adjustable geometry — what does it mean in practice?
The Amflow PR Carbon offers adjustable geometry at three points on the frame:
— Head tube angle — 5 positions spanning ±1° (64.5° in the default position). Slacker increases stability at high speed, steeper improves agility on climbs — Bottom bracket height — 2 positions: 349 mm (low, better cornering grip) or 353 mm (high, better obstacle clearance) — Chainstay length — 4 positions ranging from 440 to 452 mm. Shorter = more agile, longer = more stable at high speed
Combining these three adjustment points creates up to 40 theoretical geometry configurations — no other e-MTB at this price point offers anything close.
Why does the Amflow PR Carbon need frame protection?
The Amflow PR Carbon's carbon frame has no factory protection on its painted surfaces — the battery cover is plastic and unpainted. The rest of the frame is fully exposed. The down tube, top tube, and chainstays are directly in the line of fire from rock strikes, gravel, and mud on every ride. At a starting price of €5,899, every chip into the carbon is unnecessary damage. The Tectora (STEK PPF) kit from BikeProtection at €105 is less than 2% of the bike's value — and protects the frame for 10 years.
What does the Tectora (STEK PPF) kit from BikeProtection protect on the Amflow PR Carbon?
The kit is laser-cut specifically for this frame — not a universal sheet. It covers the complete painted carbon frame. The plastic battery cover is not part of the kit — it's a removable component without paint:
— Down tube (full front face + underside) — primary rock strike zone
— Top tube — handlebar contact during transport, most common scratch location
— Seat tube — cable rub and leg contact on technical climbs
— Chainstays — chain slap, mud abrasion, foot contact
— Rear triangle — coverage of stays and pivot surrounds
— Cable exit ports — protection from wear from the very first ride
The Tectora film is 208 microns thick with a self-healing top coat — light scratches disappear with gentle heat from a hair dryer. Available in matte and gloss to match your frame's finish.
Tectora PPF vs rubber frame protectors — which is better for the Amflow PR Carbon?
Rubber guards cover the chainstays. Tectora STEK PPF covers the entire frame. On the premium carbon of the PR Carbon, rubber patches are also a visual problem — the clean Amflow design deserves protection that's invisible at riding distance. PPF doesn't trap grit underneath, doesn't peel after a wet season, and the self-healing layer takes care of minor scuffs on its own.
How to apply the Tectora (STEK PPF) kit on the Amflow PR Carbon?
The kit uses a wet application method — no specialist tools, no professional installer required. Clean the frame with isopropyl alcohol, wet both the frame surface and the film backing, slide each pre-labelled piece into position, squeegee out the water and leave to cure. Apply the hair dryer only at the very end to seal the edges. Total installation time: 2–3 hours. Each piece is pre-cut and labelled specifically for the Amflow PR Carbon. A full step-by-step video guide is available here:
Buy the Tectora (STEK PPF) kit from BikeProtection for Amflow PR Carbon — €105 → AMFLOW PR CARBON / PRO – Frame Protection Kit – STEK PPF | TECTORA – BikeProtection
Frequently asked questions
Does the Tectora kit cover the plastic battery cover on the Amflow PR Carbon? No — the plastic battery cover is a removable component without paint and is not part of the Tectora (STEK PPF) kit from BikeProtection. All painted carbon surfaces of the frame are covered — down tube, top tube, seat tube, chainstays, and rear triangle.
What is the difference between frame protection on the Amflow PR Carbon and PX Carbon? The Amflow PX Carbon has a permanently integrated battery inside the down tube — the entire down tube is painted and covered by PPF. The PR Carbon has a removable battery with a plastic cover — that cover is not covered by PPF. The rest of the frame is protected identically on both models.
Is PPF protection worth it for the Amflow PR Carbon? Yes. The PR Carbon's carbon frame has no factory protection on its painted surfaces. The Tectora (STEK PPF) kit from BikeProtection costs €105 — less than 2% of the bike's value — and carries a 10-year guarantee against yellowing and cracking.
The Amflow PR Carbon is an e-MTB for riders who want the full power of the Avinox ecosystem with the practicality of a removable battery. One Tectora (STEK PPF) kit from BikeProtection, applied once before the first ride, and the carbon looks new even after hundreds of trail kilometres.